Danger Den water cooling - water cooling PC systems

Danger Den 4200 Kit water cooling PC system

• TDX - CPU Block with Universal Top and High Flow Chrome Fittings.
• Acetal MAZE4 GPU Graphics Block for ATI or Nvidia.
• Black Ice Xtreme Radiator (Black) with High Flow Chrome Fittings.
• Danger Den DD-D5 12V Pump.
• Papst 120mm Fan.
• MCT-5 32oz Bottle.

DETAIL

MAZE4 Power Kit water cooling PC system

• MAZE4 CPU Block with Universal Top and High Flow Chrome Fittings.
• Black Ice Xtreme Radiator (Black) with High Flow Chrome Fittings.
• Danger Den MAG-II LE 12V Pump.
• Sunon 120mm Fan.
• 1 DDBay Reservoir High Density Polyethylene.

DETAIL

NVIDIA Kit 4101 water cooling PC system

• TDX Universal Block - Fits most motherboards on the market including the NEW AMD AM2 boards.
• Feature a Shiny Black Powder Coat finish!
• Danger Den D5 Laing Pump.
• Single 5 1/4 Bay reservoir with a smoke gray front face.
• 1/2" ID Tygon Tubing.
• Black Ice Xtreme Radiator.
• MCT Non-Conductive Coolant.
• Sunon 120mm Fan.
• Miscellaneous Hardware.

DETAIL

MAZE4 Intro Kit water cooling PC system

• MAZE4 CPU Block with Universal Top and High Flow Chrome Fittings.
• Black Ice Pro Radiator (Blue) with High Flow Chrome Fittings.
• Danger Den MAG-II LE 12V Pump.
• Sunon 120mm Fan.
• Zerex Coolant 4oz Bottle.
• Arctic Silver 5 - Thermal Compound.
• 7 ft of 1/2" ID Clear Flex Tubing.
• 1 DDBay Reservoir High Density Polyethylene.

DETAIL

Danger Den water cooling - water cooling GPU coolers

Koosah for Nvidia 7800/7900 water cooling PC GPU waterblock

• Complete Block Assembled with Top and Gaskets.
• High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Down.
• Hand Lapped.
• Pressure tested before shipment.

DETAIL

Tyee for the ATI X1800 and X1900 series cards water cooling PC GPU waterblock

• Complete Block Assembled with Top and Gaskets.
• Perfect Seal G 1/4 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Downs.
• Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.

DETAIL

Danger Den MAZE4GPU-SLI for Cooling Two (2) Video Cards water cooling PC GPU waterblocks

• Two (2) MAZE4GPU Low Profile blocks assembled.
• 16 Zalman VGA RAMsinks included (Some modifications may be needed under the fittings).
• 1 Foot of Tygon tubing.
• 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Down.
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment.

DETAIL

Danger Den NV-78SLI water cooling PC GPU waterblocks

• New! Compatible with the 7800 and 7900 GT/GTX cards.
• Uses the Additional RAM Pad mounting points for maximum mounting contact.
• Complete set of TWO Blocks Assembled with Top and Gaskets.
• High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for TWO Graphic Cards complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Downs.
• Hand Lapped.

DETAIL

Danger Den NV-68SLI for Ultimate Nvidia Cooling water cooling PC GPU waterblocks

• Two complete blocks assembled with Tops and Gaskets.
• High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Down.
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment.

DETAIL

MAZE5-GPU water cooling PC GPU waterblock

• Over 100% increased Surface Area for significantly improved heat transfer.
• Machine Lapped and Polished.
• Choice of fitting size.
• Complete block weighs about 6oz (171 grams).
• Non-Corrosive design.
• Delrin/Acetal Top chamber allows full use of channels with minimal flow loss.
• 7900GT, GTX and GS series (Series 2 Hold Down Style)
  7800GT, GTX, 6800 Series, 59XX Series (Series 2 Hold Down Style)
  Older cards or cards with 2 hole mount system (Uses Series 1 Hold Down Style).
• X1900, X1800, X1600 with 4 Hole Mount System (Series 2 Hold Down Style)
  Compatibility ATI: Most Radeon Series blocks (9500, 9600, 9800, and X800 series) with the two hole mounted fans (Series 1 Hold Down Style).
  Excludes the All-In-Wonders before the X1900 Series

DETAIL

Danger Den - DD-GX2 water cooling PC GPU waterblock

• Compatible with the 7950 GX2 Video Cards.
• Compatible in QUAD-SLI setups!!
• Uses the Additional RAM Pad mounting point for maximum mounting contact.
• Lower profile design to allow use of PCI slots on the top side of the block.
• New hold down design to allow the use of the PCI slot on the backside of the card.

DETAIL

Danger Den Acetal MAZE4 GPU water cooling PC GPU waterblock

• Complete Block Assembled with Top and O-ringTotal weight approximately 6oz (171 grams) Anti-Corrosion Design (NEVER will corrode)! High Flow 1/2" or 3/8" OD FittingsLow flow restriction low pressure dropStainless Steel Hold DownMachined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment to 85psi.
• *NEW* support for the 6800/7800 series (NOT 7800GS) and support for the "4" series on up to 59XXFX. Holes are available for the GeForce 2 and 3 series and should work also.
• Compatibility ATI: Most Radeon Series blocks (9500, 9600, 9800, and X800 series) with the two hole mounted fans. Excludes the All-In-Wonders before the X1900 Series
  X1600/X1800/X1900 series uses the "X" series hold down like the Nvidia 68/7800 series.

DETAIL

Danger Den NV-78 water cooling PC GPU waterblock

• *NEW* Compatible with the 7800/7900 GT &GTX.
• Uses the Additional RAM Pad mounting points for maximum mounting contact.
• Complete Block Assembled with Top and Gaskets.
• High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Downs.
• Hand Lapped.
• Pressure tested before shipment.

DETAIL

Peltier (TEC) Cooling you Graphics Processor! water cooling PC GPU waterblock

• Di-Electric Grease.
• Neoprene Condensation Prevention Kit.
• Support Bracket.
• Complete Block Assembled with Top and O-ring.
• 100% Copper 110.
• Acetal (Delrin) Top - NO Corrosion, NO Cracking.
• High Flow 1/2" or 3/8" OD Fittings.
• Stainless Steel Hold Down.
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment to 85psi.
• Max Peltier (TEC) Size is 40mm x 40mm.

DETAIL

Danger Den NV-68 water cooling PC GPU waterblock

• The NV-68 is designed to provide maximum cooling for the Nvidia 6800 series allowing significant overclocks.
• Complete Block Assembled with Top and Gaskets.
• High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Downs.

DETAIL

Danger Den Tyee - CrossFire water cooling PC GPU waterblock

• Crossfire addition of the Danger Den Tyee. The blocks can cool every required component on each card without sacrificing any PCI slots. Compatible with the X1800, X1900, and X1950 Series.
• Known compatible with the X1900/X1950 Standard (slave) and Master. X1800 Standard - Not tested with X1800 Master. Not compatible with AIW cards.
• Uses the Additional RAM Pad mounting points for maximum mounting contact.
• Lower profile design to allow use of PCI slots on the top side of the block.
• New hold down stainless steel design to allow the use of the PCI slot on the backside of the card.
• Modular design to allow cooling of the MASTER encoder chip and/or the Heat Bridge for the Voltage Regulators.
• Two (2) complete Block Assembled with Top and Gaskets.
• One (1) Master Video Encoder Cooling Bridge.
• Perfect Seal G 1/4 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Downs.
• Hand Lapped.
• Pressure tested before shipment.

DETAIL

Danger Den ATI-X18 water cooling PC GPU waterblock

• Secure mounting for RAM and GPU allowing maximum contact.
• Specifically designed for the X1800 cards and specifications.
• Future upgarde to a "Heat Bridge" to cool power modules.
• Complete Block Assembled with Top and Gaskets.
• Perfect Seal - High Flow 1/2" or 3/8" OD Fittings.
• Just one Inlet and Outlet for complete cooling.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Down Kit.
• Hand Lapped.

DETAIL

Danger Den water cooling - water cooling CPU cooling waterblocks

Copper TDX WaterBlock for AMD AM2 Processor CPU waterblock for water cooling PC system

• The TDX waterblock is designed to give top performance to every water cooling person out there.
• The TDX waterblock allows customization to get every last drop of performance from the processor.
• Complete Block Assembled with Top and O-ring.
• 100% Copper 110!
• #1 Accelerator Plate.
• High Flow 1/2" or 3/8" OD Fittings.
• Stainless Steel Hold Down.
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment to 85psi.

DETAIL

Copper TDX Block for Athlon64 754/939/940 CPU waterblock for water cooling PC system

• One of the top performing blocks in the world!

DETAIL

Copper RBX for Athlon64 & Opteron 754/939/940 CPU waterblock for water cooling PC system

• The RBX block is designed to give top performance to every water cooling person out there. The RBX block allows customization to get every last drop of performace from the processor. Compatible with the AMD Athlon 64 & Opteron 754/939/940 motherboards.

DETAIL

Copper RBX for Intel 775 Processors CPU waterblock for water cooling PC system

• The RBX block is designed to give top performance to every water cooling person out there.
• The RBX block allows customization to get every last drop of performace from the processor.
• Compatible with the Intel 775 motherboards.
• Complete Block Assembled with Top and O-ring.
• #1 Accelerator Plate.
• High Flow 1/2" or 3/8" OD Fittings.
• Stainless Steel Hold Down.
• Including Poly barbed "Y".
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment to 85psi.

DETAIL

Copper RBX for Intel Xeon Processors CPU waterblock for water cooling PC system

DETAIL

MAZE4 for AMD XP/MP Processors waterblock for water cooling PC system

• The MAZE4 series was designed to provide high perfomance for any setup.
• Compatible with the AMD XP/MP motherboards.

DETAIL

MAZE4 for Athlon64 & Opteron 754/939/940 waterblock for water cooling PC system

• The MAZE4 series was designed to provide high perfomance for any setup.
• Compatible with the AMD Athlon 64 & Opteron 754/939/940 motherboards.
• Complete Block Assembled with Top and O-ring.
• High Flow 1/2" or 3/8" OD Fittings.
• Low flow restriction low pressure drop.
• Stainless Steel Hold Down.
• Machined Lapped and polished beyond 1200 grit.
• Pressure tested before shipment to 85psi.

DETAIL

MAZE4-1 Peltier Version waterblock for water cooling PC system

• MAZE4-1 - PIV, AMD, Athlon64, or Opteron3" x 2.45" x 5/8" + Peltier Height + 3/8" Cold PlateUse with up to 50mm x 50mm PeltierLASER CUT LUCITE TOP.
• Includes - 4 nylon bolts, 12 nylon nuts, 4 springs, MAZE4 Cold Plate with 6 mounting screws.
• Can run with or without a peltier (Up to 50mm x 50mm).

DETAIL

Danger Den water cooling - water cooling PC system Pumps

Danger Den MAG II - LE water cooling PC system pump

• Nominal voltage: 12 VDC.
• Motor type: Brushless DC.
• Nominal power: 8 W.
• Pump bearing type: Polished Sapphire.
• Maximum head: 2.5 M (3.5 PSI, 97" H2O).
• Size: 2.1”W x 2.1”H x 1.74”D.
• Maximum flow: 567 l/hr (150 GPH).
• Weight: 241 g (8.5 oz).
• Connection size: G 1/4 BSPP.
• Warranty: 30 Months (2-1/2 Years).
• Power connector: 3-pin (fan header style).
• 50,000 Service Hours MTBF.

DETAIL

Danger Den DD12V-D5 water cooling PC system pump

• Designed with a 50,000 hour mean time before failure (MTBF).
• Uses a 4 pin standard computer molex connector.
• Use with 1/2" ID Tubing.
• Compact size allows installation almost anywhere in the case.
• Is powerful enought to supply multiple cooling block solutions (CPU/GPU/Chipsets).

DETAIL

Danger Den CSP-MAG 12 Volt water cooling PC system pump

• Nominal voltage: 12 VDC.
• Nominal power: 8 W.
• Maximum head: 2.3 M (3.3 PSI).
• Maximum flow: 540 l/hr (143 GPH).
• Connection size: 9/16” NPT.
• Electrical connector: 3-pin (fan header style).
• Motor type: Brushless DC.
• Pump bearing type: Polished Sapphire.
• Size: 2.1”W x 2.1”H x 1.75”D.
• Weight: 241 g (8.5 oz).
• Warranty: 30 Months (2-1/2 Years).

DETAIL

Danger Den - DDC-12V REV2 "PLUS" water cooling PC system pump

• Motor design: Electronically commutated, brushless DC, spherical motor Voltage Range: 8 to 13.2 VDC.
• 9 VDC required to start.
• Motor rated at: 18W.
• Maximum system pressure: 150 kPa (1.5 bar).
• Temperature range: Up to 140F (60C).
• Acceptable media: Domestic hot water, water/Glycol mixtures and other media on request.
• Corrosion resistant.

DETAIL

Danger Den water cooling - water cooling PC system Radiators

Black Ice GTX120 water cooling PC system radiator

• The Black Ice® GTX120 brings true next generation PC Radiator technology to a higher level of performance. Using the new GTX platform, the GTX120 provides twice the liquid heat transfer surface area with a unique pre-cool/aftercool coolant flow configuration which increases heat transfer efficiency and internal system flow rates. The first effective dual core PC radiator. High performance and quiet operation no longer need to be a compromise.

DETAIL

Black Ice GTX240 water cooling PC system radiator

• The Black Ice® GTX240 raises the bar on performance on the GTX platform by offering a dual 120mm fan configuration. The GTX240 utilizes the same radically optimized Black Ice GTX dual core design maximizing heat exchange, coolant flow, and stealth silent operation.

DETAIL

Stealth GTS 120 Black Ice water cooling PC system radiator

• The Black Ice® GT Stealth 120 is the first true next generation PC radiator designed for uncompromising performance and stealth silent operation. The GTS120 boasts of a radically redesigned Black Ice® core technology that maximizes heat transfer efficiency and maintains effectively the same compact profile of the Black Ice® Pro.

DETAIL

X-Flow Stealth GTS 120 Black Ice water cooling PC system radiator

• Single-pass U-flow tank configuration.
• Custom MaxFin™ 25 micron Copper Splitter Fin Configuration utilizing 45% thinner fin material yielding up to 50% less pressure drop even with twice the fin density.
• Unique fin configuration eliminates intra-louver accumulation of dust particles for trouble free operation.
• Unprecedented Ultra-high 30 FPI (Fins Per Inch) fin density providing dramatically increased heat transfer surface area.
• Custom low-profile 19.0 x 1.2mm MaxFlow™ tubes with 15% more waterside surface area and 60% frontal area reduction for superior low air-resistance aerodynamics and lower internal flow requirements.
• Yields up to 20% more heat exchange capacity than the Black Ice® Pro in both Stealth or Performance modes.
• Achieves Black Ice® Xtreme level performance in stealth mode (low-noise/low-airflow conditions).
• M4 Threaded Screw Holes (works for 6-32 also) for easier mounting and greater adaptability.
• Now standard G 1/4" female threaded fittings.
• Full high-temper brass structural construction for weight reduction and superior corrosion resistance.
• High performance compact radiator compatible as an upgrade to the Black Ice® Pro and most 120mm form factor radiators.
• Uses 100% Non-corrosive water-solluble fluxing process.

DETAIL

Stealth GTS 360 Black Ice water cooling PC system radiator

• Two-pass U-flow tank configuration.
• Custom MaxFin™ 25 micron Copper Splitter Fin Configuration utilizing 45% thinner fin material yielding up to 50% less pressure drop even with twice the fin density.
• Unique fin configuration eliminates intra-louver accumulation of dust particles for trouble free operation.
• Unprecedented Ultra-high 30 FPI (Fins Per Inch) fin density providing dramatically increased heat transfer surface area.
• Custom low-profile 19.0 x 1.2mm MaxFlow™ tubes with 15% more waterside surface area and 60% frontal area reduction for superior low air-resistance aerodynamics and lower internal flow requirements.
• Yields up to 20% more heat exchange capacity than the Black Ice® Pro III in both Stealth or Performance modes.
• Achieves Black Ice® Xtreme III level performance in stealth mode (low-noise/low-airflow conditions).
• M4 Threaded Screw Holes (6-32 compatible also) for easier mounting and greater adaptability.
• Now standard G 1/4" female threaded fittings.
• Full high-temper brass structural construction for weight reduction and superior corrosion resistance.
• High performance compact radiator compatible as an upgrade to the Black Ice® Pro III and most 360mm form factor radiators.
• Uses 100% Non-corrosive water-solluble fluxing process.
• Lead-free construction for environmental protection and RoHS compliance.
• Full electrostatic polyurethane painting finish for uniform coating with high temperature curing for increased finish durability.
• Renowned Black Ice® quality.
• Patent Pending Design.

DETAIL

X-Flow Black Ice Pro water cooling PC system radiator

• The Black Ice® Pro XFlow is the much awaited update on the original compact high-performance radiator specifically designed for PC water-cooing. It uses a full copper-finned core with a high-density louvered copper fin configuration, flat tubes for maximum coolant-core heat conductivity, built-in mounting brackets and plenum chamber with taptight screwholes for outstanding cooling performance that fits perfectly inside your PC. Now optimized for low flow cooling system configurations.

DETAIL

X-FLow Black Ice Pro II water cooling PC system radiator

• The ultimate radiator for the hardcore case hacker, now with twice the cooling capacity and performance. Based on the same high-performance Black Ice® Platform, the Black Ice® Pro II has all the features of the compact Black Ice® Prime but now sports twice the core area for twice the thermal capacity and is readily configured for dual 120mm fans. Now optimized for low flow cooling system configurations.

DETAIL

X-Flow Black Ice Pro III water cooling PC system radiator

• 2-pass Radiator specifically developed for PC watercooling based on the same high-performance Black Ice® design.
• Triple the performance: rated for 1732.5 KCal per hour (6875 BTU per hour).
• 360 mm (9.44 inch) Copper core consisting of flat tubes for maximum heat conductivity.
• High-density louvered copper fin configuration for enhanced heat dissipation.
• Built-in plenum chamber for increased performance and noise reduction.
• Self-tapping and case mounting holes for easy installation of 3 120mm fans.
• Now standard G 1/4" female threaded fittings.
• Optimized XFlow tanks designed for high flow restriction cooling systems.
• Optimal 412 x 133 x 25 mm (16.22 x 5.25 x 1 inch) dimensions allows it to fit inside most mid-tower cases.
• Specifically designed for the professional case mod enthusiast.

DETAIL

Black Ice Micro water cooling PC system radiator

• The most compact addition to the Black Ice PC Radiators series. Built around an 80mm fan form factor, the Black Ice Micro fits the duty where compact size and performance matters most.

DETAIL

Black Ice Micro II water cooling PC system radiator

• The Black Ice Micro2 levels up the performance of the most compact PC radiator, the Black Ice Micro. Built around a dual 80mm fan form factor, the Black Ice Micro2 fills in the duty where dual 80mm fan performance and easy installation is a must in performance computer cases.

DETAIL

Danger Den water cooling - water cooling PC system Reservoirs

Danger Den Single 5 1/4" Bay water cooling PC system reservoir

• Laser Cut Cast Acrylic Material.
• 3/8" Thick Acrylic Side and Back Pieces.
• Water-tight seals and pressure-leak tested.
• Fits in One (1) 5 1/4 Drive Bay.
• Uses HIGH FLOW FITTINGS.
• One (1) inlet and One (1) outlet fitting for higher reliability.
• Two (2) Pre-Drilled 5mm LED Holes.
• Easy to install/Refill Center divider to eliminate air bubbles.
• 4 Fan Mounting Screws.
• Contoured edges and corners - injury free install.

DETAIL

Danger Den Dual 5 1/4" Bay water cooling PC system reservoir

• Danger Den Dual Bay Reservoir (HDP) is designed to fit into TWO (2) 5-1/4 drive bays. Manufactured with Lucite for a clear view of the water level.
• Laser Cut Cast Acrylic Material.
• 3/8 " Thick Acrylic Side and Back Pieces.
• Water-tight seals and pressure-leak tested.
• Fits in Two (2) 5-1/4 Drive Bay.
• Uses HIGH FLOW FITTINGS.
• (1) inlet and One (1) outlet fitting for higher reliability.
• (2) Pre-Drilled 5mm LED Holes.
• Easy to install/Refill.
• Center divider to eliminate air bubbles.
• Includes Mounting Screws.
• Contoured edges and corners- injury free install.

DETAIL

Fillport Reservoir water cooling PC system reservoir

• Easy to install.
• Requires an existing or new Fillport.
• Adds additional coolant to the system to minimize "top offs".
• Clear and quick view of coolant level.
• Compatible with G 1/4 BSPP thread O-Ring fittings.
• Water Tight Seals and Pressure Tested.

DETAIL

Danger Den Round (Cylindrical) water cooling PC system reservoir

• 3 1/2" Tall and 2.75" Outer Diameter.
• 1/4" Thick Wall�Optional 80mm or 120mm fan brackets.
• Straight or 90 Degree fittings.
• Poly fittings shipped with sealant tape installed.

DETAIL