Google Ads
Thermo Chill water cooling - water cooling PC radiators
ThermoChill PA120.1 radiator for water cooling PC system
- Bringing the "King of Cool" crown home... The PA120 radiator series features a dual-row dual-pass 120mm form factor, available in single, double and triple sizes, optimised for the fans of today and putting into practice everything learned about watercooling efficiency and performance over the past 3 years. The PA Series boasts from 10-40% better performance over the HE Series. 10% for the high / noisy airflow end of the fan market, and up to 40% for the low airflow / silence end of the market.
- Plenumb: 10mm
- Fitting Thread: 3/8" BSP
- Construction: Brass Tanks & Tubes, Cu Fins
- Finish: Black ElectroStat.
- Weight: 1.6Kg
- FanMounting Mechanism: Black Hardened Self-Tapper 6x1/2" (x12 provided)
- Fan Center to Fan Center: Approx 130mm
- Optimised for fans upto 130cfm.
ThermoChill PA120.2 radiator for water cooling PC system
- Plenumb: 10mm
- Fitting Thread: 3/8" BSP
- Construction: Brass Tanks & Tubes, Cu Fins
- Finish: Black ElectroStat.
- Weight: 1.6Kg
- FanMounting Mechanism: Black Hardened Self-Tapper 6x1/2" (x12 provided)
- Compatibility: FG120.3, NG120.3
- Fan Center to Fan Center: Approx 130mm
- Optimised for fans upto 130cfm.
- Technical Spec by Cathar.
ThermoChill PA120.3 radiator for water cooling PC system
- Plenumb: 10mm
- Fitting Thread: 3/8" BSP (G3/8)
- Construction: Brass Tanks & Tubes, Cu Fins
- Finish: Matt Black
- Weight: 2.1Kg
- FanMounting Mechanism: Black Hardened Self-Tapper 6x1/2" (x12 provided)
- Compatibility: FG120.3, NG120.3 (1x NG120.3 provided)
- Fan Center to Fan Center: Approx 130mm
- Optimised for fans upto 130cfm.
- Technical Spec by Cathar.
- **NEW** Beats all competition within same form factor for ultra-low pressure drop
ThermoChill PA160 radiator for water cooling PC system
- Copper / brass construction with removeable mild steel powder coated shroud.
- Supplied with shroud installed - Simple removal of 2 screws allows shroud to be relocated on EITHER side of the radiator.
- CrossFlow, Single Pass, 14FPI, 1" Thick core
- 3/8" BSP Threaded Inlet and Outlet points - offers support for all hose sizes.
- Unique fan shroud gives total air seal. No loss-air as with other designs.
- Pre-punched shroud mounting holes for perfect alignment.
- Radiator designed for maximum performance with minimum noise using a single 120mm fan.
- 10mm shroud standoff to minimize dead zone. (With shroud fitted results in fan being 50mm from core surface)
- Overall dimensions HxWxD = 214x166x50mm (90mm inc shroud).
- Radiator ships with single side fan screws, shroud & neoprene shroud gasket.
- Awarded 5 out of 5 by RBMods
